Crystal Carport May 01st, 2018 - 11:16:04
Carports may not be a necessity, but they definitely have more advantages than disadvantages if installed in line with professional guidelines. Although materials such as wood have been employed in making carports both presently and in the past, there seems to be a preference for metal carports to wooden carports. This seems to be due to the fact that wooden carports are often exorbitant. A good metal carport can be made from materials like steel or aluminum. Another good material which can be used is alumawood, but its major disadvantage is that it is very heavy and this can make you incur extra transportation cost in the event that you are getting one. Metal carports made with steel are often stronger than others made from other metals like aluminum because of the ruggedness and strength of steel.
All construction projects, including carport construction projects, benefit from planning and forethought. There are a number of factors to consider when doing the advance planning for your carport. Careful thought and planning of a carport will pay dividends in the future. The failure to put effort into proper planning will undoubtedly result in a finished carport that fails to meet your needs and/or exceeds your budget. Among the factors that should be considered include the following: 1. Obtaining carport plans. There are a number of different ways to obtain decent and reasonably priced carport plans. You might design and plan your carport yourself. You can buy a package of pre-designed architectural plans in any home improvement store or over the internet. Alternatively, you could buy a pre-fabricated carport kit. Another option is to hire a local contractor who will design the carport on your behalf. Whatever you do make sure you have some confirmed plans before starting construction.
Alumawood is made of aluminum but looks and feels like wood. Metal carports can also be made out of steel or insulated polystyrene foam swathe in steel or in aluminum. Of all the materials mentioned, the cheapest by far is steel. Galvanized steel normally possesses a zinc coating which prevents corrosive elements such as salt water and acid containing liquids from eating the carport frame. This is one of the most important considerations before deciding what material to use in building a carport. Another is the thickness of the metal. Naturally, the thicker the material the longer the carport will last. Whatever the type of metal used, a carport can only be good when it is constructed in the most efficient way. Usually, a carport employing a single piece of construction to support the roof is the best. It adds strength to the whole structure and enhances the overall appearance of the carport.
Using a trim on the carports overhang will give it a more defined look that may compliment the exterior designs and colors of your home. The usual trim for a carport is a corner trim of about three inches. It is attached to the high rib part of your panel with the use of screws and having the same color as your metal trim. A "Jamb Trim" or "J-Trim" is used along the bottom part of a carport. These trims are placed by the bottom side of a carport so that it can match the corner trims that you may put along an overhang. J-Trims should be tucked under the bottom of the last panel. It will be screwed using screws having the same color as the metal panel. It can be attached onto the bottom part of the panel that has the J-Trim. It can also be placed underneath and up to the metal carport frame. Back enclosures are used for closing off an end of a carport. It can also be used for your carports end portions. It is used to add protection against elements like the wind. Back enclosures can make your carport look like more of a garage while giving your carport added strength and protection.