Crystal Carport April 16th, 2018 - 15:04:15
Lean to carports tend to look more natural and blended into your home than a flat roof. Matching the pitch of the roofs is very important. If the roof lines march then the two roofs look like they are meant to be together. This element of the carport design is particularly important for older homes. With respect to heritage homes the chose of carport is critical and those areas will have strict zoning by-laws that restrict any addition. Most additions in those areas will need to fit with the original look of the house Flat roof carports have one undeniable benefit over the other types of carport roofs. These structures can be used as a base for a second story.
Stand alone metal carports are used for many purposes. They can be used as shelters for holding a picnic in the backyard of your home or cottage. A double carport can easily accommodate a BBQ area and a few picnic tables. In order to provide protection from mosquitoes and the weather, a plain netting or screen can be used. Depending on the number of vehicles, the size of the carport can easily be adjusted. RVs and boats can be stored in bigger carports. Carports are also used to keep livestock in many areas. Carports are especially useful in winter when snow keeps falling and accumulating. Parking your car in a carport will eliminate the need to dig out your vehicle from the snow and ice which may envelop it on all sides, particularly, if it is kept in the open.
Using a trim on the carports overhang will give it a more defined look that may compliment the exterior designs and colors of your home. The usual trim for a carport is a corner trim of about three inches. It is attached to the high rib part of your panel with the use of screws and having the same color as your metal trim. A "Jamb Trim" or "J-Trim" is used along the bottom part of a carport. These trims are placed by the bottom side of a carport so that it can match the corner trims that you may put along an overhang. J-Trims should be tucked under the bottom of the last panel. It will be screwed using screws having the same color as the metal panel. It can be attached onto the bottom part of the panel that has the J-Trim. It can also be placed underneath and up to the metal carport frame. Back enclosures are used for closing off an end of a carport. It can also be used for your carports end portions. It is used to add protection against elements like the wind. Back enclosures can make your carport look like more of a garage while giving your carport added strength and protection.
Aluminum made carports is sturdier compared to polyethylene make. This type of carport can easily be assembled in less time. It is also more durable than the above mentioned material. For maximum durability however, steel or metal carports are still the best. It is more expensive than other types of carports but it is highly recommended if you can afford it. Metal carports are properly treated with modern facilities and procedures to ensure rust proof qualities for longer protection. Metal carports are ideal for permanent use and not advisable to be moved frequently. Size also matters when choosing the carport for your needs. There are carports just enough to accommodate one car. But if you have more vehicles, you can choose a bigger sized carport capable of protecting three or more cars.