Crystal Carport April 05th, 2018 - 12:46:06
Using a trim on the carports overhang will give it a more defined look that may compliment the exterior designs and colors of your home. The usual trim for a carport is a corner trim of about three inches. It is attached to the high rib part of your panel with the use of screws and having the same color as your metal trim. A "Jamb Trim" or "J-Trim" is used along the bottom part of a carport. These trims are placed by the bottom side of a carport so that it can match the corner trims that you may put along an overhang. J-Trims should be tucked under the bottom of the last panel. It will be screwed using screws having the same color as the metal panel. It can be attached onto the bottom part of the panel that has the J-Trim. It can also be placed underneath and up to the metal carport frame. Back enclosures are used for closing off an end of a carport. It can also be used for your carports end portions. It is used to add protection against elements like the wind. Back enclosures can make your carport look like more of a garage while giving your carport added strength and protection.
There are even carports which can accommodate trucks or buses. Carports also come in various designs. Standard carports are made with only frames without any walls attached to it. Other designs come with frames and are totally enclosed and sealed for better protection. A lot of manufacturers offer custom made carports depending on the specific preference of the owner because of the increasing demand among car owners. They also build carports with canopies and other materials as requested. Carports have become the best cost effective and a good alternative for car owners to house their vehicles when they do not have a garage, or are short of budget to build their own garage. With so many variations of carports in the market, there is always a carport for any purpose.
First on the list is the so called single slope metal carport. This type of metal carport is a very versatile and simple structure. It is popularly sold in the market and people have been using it for many purposes. Some of its uses include canopies, ramp covers, equipment covers, as well as apartment complexes, hay storage and as livestock shade. The single slope metal carport can also be used not only for one or two cars. It can also be designed to accommodate several or even hundreds of cars. It is a simple structure but has been servicing a lot of people for years.
The carports legs and bows or trusses should be laid on the ground. The legs should slide into the sleeves. This should be securely fastened together. The bows or trusses are lifted with the attached legs and the legs are slipped. This should be done over the raised metal sleeves. Level the framing and plumb the legs. Once the frame is squared, plumbed and leveled, the sheet metal is then ready to be attached. Make sure that the frame is in proper setting. This would result great looking carport. Amount of overhang should be the same in each end. Prevent water intrusion, put neoprene washers on the screw. Trim the carport. These are just easy to install carports. There are many styles in installing a carport. Some of the carports have longer steps. Choose the best design and color that would fit your choice. The environment we live in today is not as trusting as it used to be. Carports help keep your precious vehicles safe and protected. It gives you a sound sleep at night when traveling outdoors. Sooner or later you will realize that carports are worthy investments.